Removing The Main Motor; Fixing System; Fixing Unit; Removing The Fixing Assembly - Canon MF8100 Series Service Manual

3) Disconnect the 3 connectors [1], and remove the 8 screws [2]; then, detach
the main drive assembly [3].
[1]
[2]
[3]

3.6.10.13 Removing the Main Motor

1) Remove the 4 screws [1], and detach the main motor [2].

3.7 FIXING SYSTEM

3.7.1 Fixing Unit

3.7.1.1 Removing the Fixing Assembly

1) Turn the lever [1] of the fixing assembly 90 deg in the direction of the
arrow.
2) While holding the grip [2], slide out the fixing assembly [3] toward the
front and out of the machine.
Whenever you have to replace the fixing assembly, be sure to disconnect the
power cord first. Also, be sure to wait unit the fixing assembly has cooled
before removing it after disconnecting the power cord.
[2]
[1]
[1]
[2]
F-3-1006
[1]
[2]
[1]
F-3-1007

3.7.2 Fixing Film Unit

3.7.2.1 Removing the Fixing Assembly
1) Turn the lever [1] of the fixing assembly 90 deg in the direction of the
arrow.
2) While holding the grip [2], slide out the fixing assembly [3] toward the
front and out of the machine.
0007-8050
Whenever you have to replace the fixing assembly, be sure to disconnect the
power cord first. Also, be sure to wait unit the fixing assembly has cooled
before removing it after disconnecting the power cord.
0011-7528

3.7.2.2 Removing the Face-Up Cover

1) Turn the fixing lever [1] of the fixing assembly 90 deg in the direction of
the arrow.
2) Remove the 4 claws [2], and detach the face-up cover [3] from the fixing
assembly.
[1] [3] [2]
F-3-1008
[1] [3] [2]
F-3-1009
Chapter 3
[1]
0011-7849
[1]
0011-7850
3-155