[2]
[3]
[2]
3.6.1.4 Removing the Left Cover
1) Remove the 2 screws [1] from the side; then, remove the 3 claws [2] to
detach the right cover [3].
3.6.1.5 Removing the Cassette Pickup Roller
1) Shift down the machine to the left.
2) While lifting the release knob [1] slightly, turn it about 90 deg toward the
front; then, slide the release knob to detach.
[1]
F-3-811
F-3-812
[1]
F-3-813
[3]
[2]
[2]
F-3-814
3) Lift the release knob [1] slightly, and turn it bout 90 deg toward the rear;
then, slide the release knob fully.
4) Slide the pickup roller [1] fully; then, slide the pickup roller at an angle in
downward direction to detach.
0007-7060
3.6.2 Cassette Paper Sensor
3.6.2.1 Removing the Cassettes
1) Hold the grip, and take out the cassette.
3.6.2.2 Removing the Rear Cover
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
0007-7053
[1]
F-3-815
[1]
F-3-816
[1]
F-3-817
[1]
[2]
F-3-818
Chapter 3
0007-8545
0007-8562
[3]
3-125