User Maintenance; Cleaning The Scanning Area; Cleaning The Adf Area; Toner Cartridge - Canon MF8100 Series Service Manual

4.1 User Maintenance

4.1.1 Cleaning the Scanning Area

Wipe the scanning area (shaded area) with a clean, soft, lint-free cloth moistened
with water, then wipe with a clean, soft, dry, lint-free cloth.

4.1.2 Cleaning the ADF Area

Black lines may appear in copies when the ADF is used to feed documents.
This is caused by paste, ink, correction fluid, or other foreign matters in the read
area of the platen glass (shaded area). Use a clean soft cloth to wipe the read area
clean. Take particular care to clean at the locations where the black lines are
appearing on copies.
If you have trouble getting the glass clean, wipe with a cloth moistened with water
or a mild neutral detergent, and then wipe the glass dry with another cloth.
Paste, ink,
correction fluid,
etc.

4.1.3 Toner Cartridge

Replace it as necessary.

4.1.4 Drum Cartridge

Replace it as necessary.

4.1.5 Mylar Sheet

If necessary, clean the mylar sheet with a firmly squeezed wet soft cloth.

4.1.6 Pressure Roller (fixing assembly)

The following is a procedure for cleaning the pressure roller.
1) Open the multifeeder tray.
2) Open the face-up delivery tray.
3) Place a sheet of A4 or LTR paper in the multifeeder tray.
4) Press [menu] on he control panel, and make the following selections: 10. maintenance>3. roller cleaning>2. cleaning paper print. Then, press [OK] to print out
a cleaning paper.
5) Place the cleaning page from step 4) in the multifeeder with the printed side facing downward and in the direction of the arrow.
Platen glass co ver
Read area
Black lines
Copy
Platen glass
F-4-1
White r o ller
F-4-2
F-4-3
Chapter 4
0008-3059
0008-3062
0008-1734
0008-1735
0008-1736
0008-1737
4-1