Canon Color imageCLASS MF8170c Set-up Instructions Manual

Color laser copier - printer - scanner - fax
Hide thumbs Also See for Color imageCLASS MF8170c Set-up:

Advertisement

READ THIS FIRST
READ THIS FIRST
Thank you for purchasing Canon Color imageCLASS MF8170c.
To get your machine ready for use, please follow the instructions in this document before referring to any other documentation.
Unpack the machine and its components.
Check that you have the following:
Drum cartridge
Power cord
Telephone cable
USB cable
NOTE
For the list of software included in the User Software CD, see the Set-Up Instructions for Networking and Printing.
A nework cable is not included.
Set-Up Instructions
Set-Up Instructions
for the Machine
Machine
Toner cartridges
(Yellow, Magenta, Cyan, Black)
Manuals (Set-Up Instructions for the Machine, Set-Up
Instructions for Networking and Printing, Basic Guide,
Facsimile Guide)
User Software CD
Registration Card
Limited Warranty Note
Limited Warranty Note for EP-87 Cartridges
Document feeder tray
Destination labels

Advertisement

Table of Contents
loading

Summary of Contents for Canon Color imageCLASS MF8170c Set-up

  • Page 1 READ THIS FIRST READ THIS FIRST Thank you for purchasing Canon Color imageCLASS MF8170c. To get your machine ready for use, please follow the instructions in this document before referring to any other documentation. Unpack the machine and its components.
  • Page 2: Remove The Shipping Materials

    Remove the shipping materials. IMPORTANT For important safety instructions on installation and handling of the machine, see “Important Safety Instructions” ● in the Basic Guide. 1 Remove all the shipping tape and foam blocks on the outside of the machine. 2 Open the document feeder and remove the protective sheet inside.
  • Page 3: Connect The Telephone Cable

    Connect the telephone cable. 1 Connect the supplied cable to the (LINE) jack. Then connect the other end to the telephone line jack on your wall. 2 Connect an extension telephone or answering machine to the (EXT.) jack (optional). Connect the power cord. 1 Plug the power cord into the rear socket ➊.
  • Page 4 Install the drum cartridge. 1 Lift the scanning platform ➊, and open the cartridge cover ➋. 3 Remove the shipping materials. IMPORTANT Do not open the protective shutter or touch the sensors, electrical contacts, cartridge memory or imaging ● transfer belt on the drum cartridge. Protective shutter Electrical...
  • Page 5: Install The Toner Cartridges

    Install the toner cartridges. 1 Check the color marking on the cartridge receptacle in the machine. Remove the toner cartridge of the same color from the bag. Protective cover 3 Remove the protective cover. IMPORTANT Do not touch the developing roller, sensors, electrical contacts or cartridge memory on a toner cartridge. ●...
  • Page 6: Load Paper

    Load paper. 1 Pull out the paper cassette completely. 3 Pinch and slide the blue rear paper end guide to match the size of paper. Paper limit Paper limit mark mark 5 Load the paper into the cassette. Make sure the stack height does not exceed the limit mark.
  • Page 7 Set the basic fax settings. IMPORTANT Before sending a fax, you MUST register the current date and time, fax number, and unit name in the machine. ● NOTE For details on setting up the machine for the fax function, see the Facsimile Guide. ●...
  • Page 8 <2.UNIT NAME> ➝ press [Set] ➌. ➍ ➝ press [Set] ➌. Canon and imageCLASS are trademarks of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice.

Table of Contents