Main Motor; Removing The Rear Cover; Removing The Reader Assembly - Canon MF8100 Series Service Manual

[1]

3.6.10 Main Motor

3.6.10.1 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
4) Close the reader assembly; then, detach the rear cover[1].
[3]
[2]
F-3-981

3.6.10.2 Removing the Reader Assembly

1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
[2]
F-3-978
[1]
[3]
[2]
F-3-979
[4]
[5]
F-3-980
[1]
[3]
0007-7974
When closing the reader assembly, be sure to push in the arm [1] first.
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
0007-8487
[1]
[1]
[2]
[2]
F-3-982
[1]
F-3-983
[1]
[3]
[2]
F-3-984
Chapter 3
3-151