Removing The Developing Rotary Assembly; Removing The Left Frame; Removing The Fan Duct; Removing The Laser Scanner Unit Base - Canon MF8100 Series Service Manual

[2] [1]
Be sure to tighten the self-tapping screw used to secure the rotary drive as-
sembly only at the end of the work.

3.5.11.12 Removing the Left Frame

1) Remove the 4 screws [1], and detach the left frame [2].
[1]

3.5.11.13 Removing the Fan Duct

1) Disconnect the 4 connectors [1], and remove the 2 claws [2].
2) Slide the fan duct [3] in upward direction to detach.
[1] [1]
[1] [1]

3.5.11.14 Removing the Laser Scanner Unit Base

1) Disconnect the 6 connectors [1] of the DC controller board.
[2] [3] [2]
F-3-773
[2]
[1]
F-3-774
[3]
[2]
F-3-775
2) Free the harness [1] from the harness guide [2].
3) Disconnect the connector [3], and remove the 8 screws [4]; then, detach
the laser scanner base [5]
0007-8837
[3]
0007-8838

3.5.11.15 Removing the Developing Rotary Assembly

1) Remove the 2 screws [1].
2) Push in the top [2] of the rotary holder toward the inside of the machine
using the tip of a screwdriver to see that the holder has been disengaged
from the machine.
0007-8851
[2]
[1]
F-3-776
[4]
[4]
[5]
[4]
F-3-777
[1]
F-3-778
Chapter 3
[2]
[1]
0007-8852
3-119