4
Disassembly/Assembly > Controller System > Removing the Main Motor Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/MF4410/MF4412)
Caution:
Align the drive cover [2] with the 14 shaft holes [1] to mount it.
[1]
[1]
4
Disassembly/Assembly > Controller System > Removing the Main Motor Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/MF4410/MF4412)
[1]
[2]
F-4-195
Before Removing the Main Motor
Single-sided models (MF4450/MF4452/MF4453/
MF4430/MF4420n/MF4410/MF4412)
1) Remove the left cover. (Single-sided models) (Refer to page 4-32)
2-1) Remove the SADF unit and reader unit. (models with SADF) (Refer to page 4-53)
2-2) Remove the copyboard cover and reader unit. (models with copyboard)(Refer to page
4-64)
3) Remove the right cover. (Single-sided models) (Refer to page 4-34)
4) Remove the front cover unit. (Refer to page 4-35)
5) Remove the upper cover. (Refer to page 4-35)
Removing the Main Motor
Single-sided models (MF4450/MF4452/MF4453/
MF4430/MF4420n/MF4410/MF4412)
1) Remove the scanner cover [1].
• 2 screws (black TP) [2]
x2
4-85
[2]
[1]
F-4-196
4-85