Ipv6 Configuration Tab; Network Application Tab - Ricoh SP C250DN Operating Instructions Manual

Hide thumbs Also See for SP C250DN:
Table of Contents

Advertisement

5. Configuring the Machine Using Web Image Monitor

IPv6 Configuration Tab

IPv6
Item
IPv6
IPv6 Address
Item
DHCP
IP Address (DHCP)
Stateless Address
Gateway Address
Link-local Address
Manual Configuration
Address
Prefix Length
Gateway Address

Network Application Tab

Network Print Setting
Item
IPP
114
Select whether to enable or disable IPv6. You cannot disable IPv6 using
Web Image Monitor if the machine is currently in use in an IPv6
environment. In this case, use the control panel to disable [IPv6] under
network settings.
When disabled, [DHCP], [Manual Configuration Address], [Prefix Length],
and [Gateway Address] below cannot be configured.
Select whether or not the machine obtains its IPv6 address from a DHCP
server.
Displays the IPv6 address obtained from the DHCP server when [DHCP] is
set to [Active].
Displays up to four stateless auto addresses.
Displays the machine's default gateway address.
Displays the link local address of the machine. The link local address is an
address that is valid only inside the local network (local segment).
Enter the machine's IPv6 address. Can contain up to 39 characters.
Enter the prefix length, using a value between 0 and 128.
Enter the default gateway's IPv6 address. Can contain up to 39 characters.
Select to enable network printing using Internet Print Protocol (via TCP port
631/80).
Description
Description
Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp c252dn

Table of Contents