Smtp Tab; Pop3 Tab - Ricoh SP C250DN Operating Instructions Manual

5. Configuring the Machine Using Web Image Monitor

SMTP Tab

SMTP
Item
Primary SMTP Server
Port No.
Authentication Method
User Name
Password
Device E-mail Address
Server Timeout
(seconds)

POP3 Tab

POP3 Settings
Item
POP3 Server
User Account
118
Enter the IP address or host name of the SMTP/POP3 server. Can contain
up to 64 characters.
Enter the port number for SMTP (1 to 65535).
Select an authentication method from the following:
[Anonymous]: The user name and password are not necessary.
[SMTP]: The machine supports NTLM and LOGIN authentication.
[POP before SMTP]: The POP3 server is used for authentication. When
sending e-mails to an SMTP server, you can enhance the SMTP server
security level by connecting to the POP server for authentication.
Enter the user name for logging in to the SMTP server. Can contain up to 32
characters.
Enter the password for logging in to the SMTP server. Can contain up to 32
characters.
Enter the machine's e-mail address.
This address is used as the sender's address of e-mail messages sent from
this machine, such as notification e-mails. Can contain up to 64 characters.
Enter the number of seconds the machine waits before considering an
SMTP operation to have timed out (1 to 999).
Enter the IP address or host name of the POP3 server for e-mail reception.
The POP3 server specified here will be used for [POP before SMTP]. Can
contain up to 64 characters.
Enter the user name for logging in to the POP3 server. Can contain up to 32
characters.
Description
Description