Ricoh SP C250DN Operating Instructions Manual page 96

4. Configuring the Machine Using the Control Panel
• IP Address
Specifies the machine's IPv4 address when DHCP is not used.
Use this menu to check the current IP address when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• Subnet Mask
Specifies the machine's subnet mask when DHCP is not used.
Use this menu to check the current subnet mask when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• Gateway Address
Specifies the machine's default gateway address when DHCP is not used.
Use this menu to check the current default gateway address when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• IP Addr. Method
Displays the IP address acquisition method.
• DHCP
• Auto IP
• Manual Config.
• Default IP
• IPv6 Config.
• IPv6
Selects whether to enable or disable IPv6.
Default: [Active]
• Active
• Inactive
• DHCP
Sets the printer to receive its IPv6 address from a DHCP server.
When DHCP is used, you cannot specify the IPv6 address manually.
Default: [Inactive]
• Inactive
• Active
94