Control Panel - Ricoh SP C250DN Operating Instructions Manual

Control Panel

1. [Stop/Start] key
Press this key to stop receiving incoming data from the computer.
2. [Job Reset] key
Press this key to cancel a job that is currently being printed or received.
3. [Menu] key
Press this key to configure or check the machine settings.
Press the [Menu] key again to return to the initial screen.
4. Display
Displays the current status and messages.
5. [Escape] key
Press this key to cancel an operation or to return to the previous screen.
6. [OK] key
Press this key to confirm settings and setting values, or move to the next menu level.
7. Scroll Keys
Press to scroll the screen or to adjust values.
8. Data In Indicator
Flashes when the machine is receiving data from a computer. The data indicator is lit if there is data to be
printed.
9. Alert Indicator
Lights up in red whenever an error occurs. Check the displayed error message. Flashes in yellow when the
toner has nearly run out.
10. Power Indicator
Remains lit while the power is on. It is unlit when the power is off.
• The color of the control panel varies depending on the model.
1 2 3
10 9 8
Guide to Components
4
5
7 6
DAC527
21