Table of Contents
Advertisement
Linksys
IPv6:
Enable DHCP Server
Check the option to enable the DHCP server
automatic IP lease function. When enabled,
all PCs will be able to acquire IP automatically.
Otherwise, users should configure static virtual IP
for each PC.
Client lease Time
This is to set up a lease time for the IP address
acquired by a PC. The default is 1,440 minutes
(one day). Users can change it according to their
needs. The time unit is minutes.
Range Start
The initial IP automatically leased by DHCP. The
default initial IP is fc00::100.
Range End
The final IP automatically leased by DHCP. The
default initial IP is fc00::17f.
DNS Server (required) 1
Input the IP address of the DNS server.
Static DNS 2
Input the IP address of the DNS server.
DHCP Status
This is an indication list of the current status and setup record of the DHCP
server. The indications are for the administrator's reference when a network
modification is needed.
VID
VLAN ID.
DHCP Server
Current DHCP IP.
Dynamic IP Used The number of dynamic IPs leased by DHCP.
Static IP Used
The number of static IPs assigned by DHCP.
DHCP Available
The number of IPs still available in the DHCP server.
Total
The total number of IPs the DHCP server is configured to
lease.
Client Table
Client Host Name The name of the current computer.
IP Address
The IP address acquired by the current computer.
MAC Address
The actual MAC network location of the current
computer.
(IPv4 Only)
Client Lease Time The lease time of the IP released by DHCP.
Delete
Remove a record of an IP lease.
Router Advertisement (IPv6)
PCs in the LAN can configure an IPv6 address through Router Advertisement
function.
Go to Configuration > DHCP > Router Advertisement page to enable the
function. When this feature is enabled the router periodically multicasts a
router advertisement packet, including prefix information, that announces it is
available. A host will learn the prefixes and parameters for the local network.
Before configuring Router Advertisement, you should enabled Dual-Stack IP on
the Setup > Network page.
NOTE:
Remember to click Save to save your settings before leaving the page. You
can also click Cancel to leave without any change.
Advertisement Mode:
The default value is "Unsolicited Multicast, "
which will send router advertisements to all
IPv6 devices.
Choose "Unicast
advertisement only to already known IPv6
devices.
Advertisement Interval:
Input the interval time for the router to send
out the RA messages.
DHCP
Only" to
send
router
26
Hide quick links:
Advertisement
Table of Contents
