Linksys LRT224 User Manual page 47

Linksys
You can use the Rows per page list at the top right corner of the table to decide
the number of rules to display on each page, and use the Page list to choose a
particular page.
Priority
Indicates the priority of the access rule; 1 being
the highest. Select an option from the drop-down
list to change the priority. The default access rules
have the lowest priority.
Enable A new rule will be automatically assigned with a
priority. You can change the priority by editing.
To add a new rule Check the Enable box to enable or uncheck to
disable. The default rules are not allowed to
change.
To edit a custom rule Click Edit.
To delete an existing Click Delete and click OK to continue, or click
rule Cancel to close the message without deleting the
rule.
Return to Default Click Restore to Default Rules to delete all the self-
Rules defined settings.
Adding or Editing access rules
Click Add or Edit to enter Access Rules configuring page.
NOTE:
Remember to click Save to save your settings before leaving the page. You
can also click Cancel to leave without any change.
Services (Both IPv4 and IPv6)
Firewall
43