Table of Contents
Advertisement
Linksys
Bandwidth Management
You can configure upstream and downstream bandwidth and set Quality of
Service (QoS) rules in this page .
NOTE Remember to click Save to save your settings before leaving the page .
You can also click Cancel to leave without any change .
The Maximum Bandwidth Provided by ISP
Input the maximum upstream and downstream bandwidth which users applied
for from ISP . The default is 512 kbit/sec .
NOTE:
The unit of calculation in this example is Kbit . Some software
indicates the downstream/upstream speed with the unit KB . 1KB =
8Kbit .
Bandwidth Management Type
There are two types of QoS: Rate Control and Priority .
Rate Control: Configure minimum (guaranteed) bandwidth and
•
maximum (limited) bandwidth for Specified IP address or Service Port .
Interface:
Select on which WAN the QoS rule should
be executed . It can be a single selection or
multiple selections .
Service:
Select a service to manage . If the bandwidth
for all services of each IP is to be controlled,
select "All (TCP&UDP) 1~65535" . You can also
click Service Management to add service
items .
IP Address:
Select which user is to be controlled . If only
a single IP is to be restricted, input this IP
address in both fields, such as "192 .168 .1 .100
to 192 .168 .1 .100" . If an IP range is to
be controlled, input the range, such as
"192 .168 .1 .100 ~ 192 .168 .1 .150" . If all Intranet
users that connect with the device are to be
controlled, input "0" in the boxes of IP address .
Direction:
Upstream: outbound traffic .
Downstream: inbound traffic .
Min . & Max . Rate: (Kbit/Sec)
The minimum bandwidth rule guarantees
minimum available bandwidth .
The maximum bandwidth rule restricts
maximum available bandwidth .
Enable:
Click to enable the rule .
Add to list:
Add this rule to the list .
Delete:
Click to delete an existing entry .
Update:
Select the entry that you would like to modify .
Change the setting and click Update . Clicking
Add New deselects the entry and clears the
text fields .
View:
Click Refresh to update the display or Close
to return to configuration page .
•
Priority: Identify priority for specified services .
System Management
33
Hide quick links:
Advertisement
Table of Contents
