Table of Contents
Advertisement
Linksys
Aggressive Mode:
Adopted by remote devices to enhance the
security control if dynamic IP is used for
connection.
Compress
(Support
IP
Reduces the size of IP datagrams. The
Payload
Compression
router will compress IP datagram size when
Protocol (IP Comp)):
initiating a tunnel. When the router works as a
responder, it will always accept compression.
Keep-Alive:
The router will keep this VPN connection
when this function is enabled. Used to
connect the remote node and headquarters
or used for the remote dynamic IP address.
AH Hash Algorithm:
Enables the router to authenticate IP
header to verify the integrity of the packets
transmitted through the tunnel.
NetBIOS Broadcast:
Ensures the passage of NetBIOS broadcast
packets. This facilitates the easy connection
with other Microsoft network, but it also
increases the amount of traffic using this
VPN tunnel.
NAT Traversal:
Allows IPSec traffic to pass through
devices that don't support IPSec packets.
Recommended if your router is behind a
NATgateway.
Dead Peer Detection (DPD): The router will regularly transmit HELLO/ACK
message packets to detect whether there is a
connection between the two ends of the VPN
tunnel. If one end is disconnected, the device
will disconnect the tunnel automatically and
then create a new connection. Users can
define the transmission time for each DPD
message packet.
VPN
57
Hide quick links:
Advertisement
Table of Contents
