Dmz Host - Linksys LRT224 User Manual

Linksys
Set the local time using Network Time Protocol (NTP) automatically:
Time Zone Select your location from the pull-down time zone list to
show correct local time.
Daylight Saving If there is Daylight Saving Time in your area, click
Enabled and enter start date and end day of the period.
NTP Server Input NTP server IP address.
Set the local time manually:
Date: Input date as yyyy.mm.dd, i.e., 2013.9.30.
Time: Input current time as hh:mm:ss, i.e., 08:50:00.

DMZ Host

When the NAT mode is activated, users may need to use applications
that do not support virtual IP addresses, such as network games or video
conferencing. We recommend that users map the device actual WAN IP
addresses directly to the intranet virtual IP addresses. Setting up a DMZ host
will allow one host in the LAN to be exposed to the Internet to use services
such as Internet gaming and video conferencing. Access to the DMZ host
from the Internet can be restricted by using firewall access rules. Use the
Configuration > Setup > DMZ Host page.
Enter the LAN IP address of the server that you want to use as a DMZ host.
Setup
15