Dmz Setting - Linksys LRT224 User Manual

Linksys

DMZ Setting

For some network environments, an independent configurable DMZ port
may be required to set up externally connected servers such as WEB and Mail
servers. Therefore, the device supports a set of independent configurable DMZ
ports for users to set up connections for servers with real IP addresses. The DMZ
ports act as bridges between the Internet and LANs.
Check Enable DMZ box and click the edit icon to configure DMZ port.
The DMZ configuration can be classified by subnet and range.
Subnet:
If the DMZ and WAN are located in different subnets:
If the ISP issued useable public IP addresses: 220.243.230.1-14 with Mask
255.255.255.240, users have to separate the 14 IP addresses into two groups:
220.243.230.1-6 with Mask 255.255.255.248, and 220.243.230.9-14 with Mask
255.255.255.248 and then set the device and the gateway in the same group
with the other group in the DMZ.
Range:
If the DMZ and WAN are within same subnet:
IP Range: Input the IP range located at the DMZ port.
Setup
13