Table of Contents
Advertisement
Linksys
NOTE:
Remember to click Save before leaving the page. You can also click
Cancel to undo the changes.
Global Configure Settings
Authentication
Password, Certificate or Password+Certificate.
Type:
Certificate Setting will be hidden when Password is
selected.
Note When you change authentication type, all client
configurations and current used certificates will be
deleted. A warning message will appear after clicking
Save. You need to confirm again to save the change.
Server
Input a virtual IPv4 address for the server. 172.31.0.0 is
the default value.
IP Address:
Subnet Mask:
Input the IPv4 subnet mask.
Protocol:
Choose handshaking protocol as TCP or UDP.
Port:
Configure OpenVPN server listen port. 1194 is the default
value.
Encryption:
Select encryption mode: NULL, DES, 3DES, AES-128,
AES-192 and AES-256.
Advanced Configure Setting
Tunnel Mode
Split Tunnel and Full Tunnel.
Security
IP
Configure allowable subnet for OpenVPN clients.
Address
Security Subnet
These two items only can be set on Split Tunnel mode.
Mask
Domain Name
Input Domain Name when Full Tunnel mode is selected.
Primary DNS
Input primary DNS server IP address when Full Tunnel
mode is selected.
Secondary DNS
Input secondary DNS server IP address when Full Tunnel
mode is selected.
WINS Server
You can also configure WINS server for OpenVPN server
when Full Tunnel mode is selected.
OpenVPN
63
Hide quick links:
Advertisement
Table of Contents
