Inbound Easylink Vpn; Add A New Account; Outbound Easylink Vpn; Edit Account - Linksys LRT224 User Manual

Linksys
Tunnel Test Click Connect to verify the tunnel status . The test result
will be updated . To disconnect, click Disconnect to stop
the VPN connection .
To delete tunnel settings, select a tunnel, and then click
the Delete icon .
Config To disconnect, click Disconnect to stop the VPN
connection .

Inbound EasyLink VPN

This page allows the administrator to add a new inbound EasyLink VPN user
(intiator) . The role of the router is responder .
Go to EasyLink VPN > Inbound EasyLink VPN to add a new remote user
configuration .
NOTE:
Click Save before leaving the page or the configuration will be abandoned .
Click Cancel to undo the changes .
NOTE:
To edit an existing inbound Easylink VPN user, go to Easylink VPN summary
page and click the Edit icon of the corresponding VPN user .

Add a New Account

VPN Role Indicates the role of the router is Responder .
Enable Indicates whether the specified inbound EasyLink
VPN account is enabled or disabled .
Account Name The username of remote user .
Password The user password of remote user .
Authentication Port Indicates authentication port .
Local Security Group Local security group type is Subnet .
Type
IP Address Input LAN IP address of the router .
Subnet Mask Input subnet mask of the router .

Outbound EasyLink VPN

This page will introduce how to configure outbound EasyLink VPN . The role of
the router is a tunnel initiator .
The router only supports one outbound Easylink VPN connection .
Go to EasyLink VPN > Outbound EasyLink VPN to configure .
NOTE:
Click Save before leaving the page or the configuration will be abandoned .
Click Cancel to undo the changes .

Edit Account

VPN Role Indicates the role of the router is Initiator .
Enable Check to enable outbound Easylink VPN connection
or uncheck to disable .
Account Name Input the username to make an outbound Easylink
VPN connection .
Password Input the required password to make an outbound
Easylink VPN connection .
Primary Server Input the IP address of remote server .
Secondary Server Input the IP address of secondary remote server .
Authentication Port Select the authentication port .
Keep Alive Check the box to enable Keep Alive .
Local Security Group Indicates local security type as Subnet .
Type
IP Address Input local IP address .
Subnet Mask Input local subnet mask .
EasyLink VPN
61