Ssl Certificate - Linksys LRT224 User Manual

Linksys
Enabled SNMP: Enable SNMP feature. Enabled is the default.
System Name: Set the name of the device, e.g., Linksys.
System Contact: Set the name of the person who manages the
device, e.g., Tom.
System Location: Define the location of the device, e.g., Irvine.
Get Community Name: Set the name of the group or community that
can view the device SNMP data. The default
setting is "Public".
Set Community Name: Set the name of the group or community that
can receive the device SNMP data. The default
setting is "Private".
Trap Community Name: Set user parameters (password required by the
Trap-receiving host computer) to receive Trap
message.
Send SNMP Trap to: Set one IP address (IPv4 or IPv6) or Domain
Name for the Trap-receiving host computer.

SSL Certificate

You can configure SSL certificates here.
NOTE:
Remember to click Save before leaving the page. You can also click Cancel to
leave without any change.
Certificate Management
Generate New Certificate:
Export Certificate for Administrator: Click Export for Admin.
Export Certificate for Client:
Import Certificate:
Existing Certificate:
System Management
Click Generate and click OK to creat
a new SSL certificate.
Click Export for Client.
Click Browse to choose a certificate
and click Import.
Indicates current certificate.
36