Table of Contents
Advertisement
Linksys
Maintenance
Diagnostic
The device provides a simple online network diagnostic tool to help users
troubleshoot network-related problems. Go to Maintenance > Diagnostic.
The features include DNS Lookup (Domain Name Inquiry Test) and Ping (Packet
Delivery/Reception Test).
DNS Name Lookup
Choose this option to test connectivity to the DNS server that you specified on
the Configuration > Setup > Network page, or to look up an IP address that you
want to use in the ping test.
Enter a host name – example: www.linksys.com (Do not include a prefix such as
http://) - and click Go. You will see the IP address of the host.
NOTE:
This feature requires that the router can connect to a valid DNS server. Please
check if your WAN interface can be linked to the Internet.
Ping
This feature informs users of the status quo of the outbound session and allows
users to know if computers are online or not.
On this screen, please enter the host IP that users want to test such as
192.168.5.20. Press Go to start the test. The result will be displayed on this
screen.
Factory Default
Use the Maintenance > Factory Default page to restore the router to its factory
default settings.
Click Factory Default if you want to restore the router to its factory default
1.
settings except OpenVPN configuration. When the confirmation message
appears, click OK to continue or click Cancel to abandon.
Click Factory Default including OpenVPN if you also want to restore
2.
OpenVPN configuration. When the confirmation message appears, click
OK to continue or click Cancel to abandon.
Maintenance
70
70
Hide quick links:
Advertisement
Table of Contents
