Table of Contents
Advertisement
Linksys
802.1Q
The router supports up to five sets of VLANs, which are used to divide networks
into several segments . Dividing networks makes them easier to manage and
enhances performance and security through isolation .
802 .1Q is a protocol for carrying VLAN traffic on an Ethernet . 802 .1Q will append
a tag which includes VLAN membership information within the original packet .
The devices can communicate with others with the same VLAN ID . In this way,
it will make the network manageable and secure .
Go to Configuration > Port Management > 802 .1Q .
802.1Q LAN Status
VLAN ID:
Indicates VLAN ID (VID) .
The first VLAN with VID1 is default VLAN and
cannot be deleted .
Description:
The name of the VLAN .
Inter VLAN Routing:
Every set of VLAN has its own DHCP address pool .
If VLAN is enabled to communicate with other
sets of VLAN, the status is shown as Enabled. The
default value is Disabled .
Device Management:
If this VLAN is allowed to open Web GUI, the status
will be shown as Enabled. The default value is
Disabled.
LAN1 ~ LAN4:
Indicates VLAN status of physical LAN port . It could
be Tagged, Untagged or Excluded .
Config.:
To configure existing VLAN .
Del.:
To delete existing VLAN .
Add:
Click Add button to add a new set of VLAN .
Port Management
39
Hide quick links:
Advertisement
Table of Contents
