Table of Contents
Advertisement
Linksys
Static IP Address: Input a specified static IP address. You can also input
0.0.0.0 in the boxes. The router will assign a static IP
address to the device.
MAC Address:
Input the static real MAC (the address on the network
card) for the server or PC.
Name:
For distinguishing devices, input the name or address of
the client that is to be bound to the server.
Enabled:
Activate this configuration.
Add to list:
Add the configuration or modification to the list.
Delete:
Remove the selected binding from the list.
Add New:
Add new binding.
•
Block MAC address on the list with wrong IP address
Check the box to enable the function. The device listed with wrong IP address
will be blocked by the router.
•
Block MAC address not on the list
Click the box to enable. The device which is not listed on the list will be blocked
by the router.
You can configure your router to function as a DNS server for your intranet
devices. It provides much faster domain name matching service than using
external DNS servers. If the requested domain name is not found in the
database, the DNS sever for WAN ports still can provide matching service.
NOTE:
Remember to click Save to save your settings before leaving the page. You
can also click Cancel to leave without any change.
Host Name:
Input the domain name, i.e. abc.com.
IP Address:
Input the IP address of the domain.
Add to list:
Add the configuration or modification to the list.
Delete:
Remove the selected entry from the list.
Add New:
Add new entry.
NOTE:
When you enable DNS local database, you have to set the IP address of
the router as DNS server for your computer. It will be "Obtain DNS server
address automatically" by default.
DHCP
28
Hide quick links:
Advertisement
Table of Contents
