Dhcp Status; Router Advertisement (Ipv6) - Linksys LRT214 User Manual

Gigabit vpn routers
Hide thumbs Also See for LRT214:
Table of Contents

Advertisement

Linksys

DHCP Status

This is an indication list of the current status and setup record of the DHCP
server . The indications are for the administrator's reference when a network
modification is needed .
VLAN ID .
VID
DHCP Server
Current DHCP IP .
Dynamic IP Used The number of dynamic IPs leased by DHCP .
The number of static IPs assigned by DHCP .
Static IP Used
DHCP Available
The number of IPs still available in the DHCP server .
The total number of IPs the DHCP server is configured to
Total
lease .
Client Table
Client Host Name The name of the current computer .
IP Address
The IP address acquired by the current computer .
The actual MAC network location of the current
MAC Address
computer .
(IPv4 Only)
Client Lease Time The lease time of the IP released by DHCP .
Delete
Remove a record of an IP lease .

Router Advertisement (IPv6)

PCs in the LAN can configure an IPv6 address through Router Advertisement
function .
Go to Configuration > DHCP > Router Advertisement page to enable the
function . When this feature is enabled the router periodically multicasts a
router advertisement packet, including prefix information, that announces it is
available . A host will learn the prefixes and parameters for the local network .
Before configuring Router Advertisement, you should enabled Dual-Stack IP on
the Setup > Network page .
NOTE Remember to click Save to save your settings before leaving the page .
You can also click Cancel to leave without any change .
The default value is "Unsolicited Multicast, "
Advertisement Mode:
which will send router advertisements to all IPv6
devices .
Choose
advertisement only to already known IPv6
devices .
Advertisement Interval:
Input the interval time for the router to send out
the RA messages .
RA Flags:
When Managed is checked, IP information can be
found on the DHCPv6 server in LAN .
When Other is checked, IP and other information,
such as DNS server, can be got from DHCPv6 server
in LAN .
You can check or uncheck both options .
If two routers are accessible, the one with the
Router Preference:
higher preference will be chosen by the host .
Choose High, Medium or Low .
MTU:
(Maximum
Input MTU value . MTU is the largest packet size
can be sent .
Transmission Unit)
Router Lifetime
Router advertisements expire after a period
determined by you . Devices on the network will
not try to access a router at an expired address .
DHCP
"Unicast
Only"
to
send
router
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lrt224

Table of Contents