Monitor Function; Speech Compressor - Icom IC-7000 Instruction Manual

6
FUNCTIONS FOR TRANSMIT

■ Monitor function

The monitor function allows you to monitor your trans-
mitted signals at the IF in any mode through the
speaker. The CW side tone functions regardless of
the monitor function setting.
q Push [AF( )] momentarily to enter the set mode
SET
menu.
w Push [F-4 OTH] to enter the miscellaneous (oth-
ers) set mode.
e Push [F-1 ≤] several times to select "Monitor."
r Rotate [DIAL] to turn the monitor function ON.
• Push [F-4 DEF] for 1 sec. to return to default condition.
t Push [F-2 ≥] to select "Monitor Level."
y Rotate [DIAL] to adjust the monitor level.
• Push [F-4 DEF] for 1 sec. to return to default level.
u Push [Z(
/
MENU GRP
erating mode.
Use headphones to prevent feedback.

■ Speech compressor

The IC-7000 has a built-in, low distortion speech com-
pressor circuit. This circuit increases your average
talk power in SSB mode and is especially useful for
DX'ing when the receiving station is having difficulty
copying your signal.
q Select an SSB mode.
w Select M-3.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times to
select the menu M-3.
e Push [F-2 COM] momentarily to turn the speech
compressor function ON and OFF.
• " " appears.
89
)] twice to return to normal op-
[AF]
[MENU/GRP] [F-1] [F-2]
Appears
[MENU/GRP] [F-2]
[F-4] [DIAL]