D Channel Frequency Adjustment; Receive And Transmit - Icom IC-7000 Instruction Manual

4

RECEIVE AND TRANSMIT

D Channel frequency adjustment

q Select the TV mode.
• Push and hold [AF(
w Push [AF( )] momentarily to turn the blue-back-
SET
ground display ON.
e Rotate [M-ch] (inner) control to select the desired
TV channel.
• [Y( )]/[Z(
BAND BAND
r Push [F-2 ADJ] to enter the channel frequency set
mode.
• The selected channel frequency appears and [RX] in-
dicator blinks.
• Push [TS] to toggle the tuning step from 1 kHz and 250
kHz.
• Push [Z(
/
MENU GRP
mode.
t Rotate [DIAL] to adjust the channel frequency.
• "Push [SET]" blinks.
• Push [Z(
/
MENU GRP
y Push [F-3 SET] to set the channel frequency.
• Push [F-4 DEF] for 1 sec. to return to the default fre-
quency.
u Push [Z(
/
MENU GRP
set mode.
• The channel frequency disappears and [RX] indicator
stops blinking.
i Repeat steps e to u to set the another channels,
if desired.
o Push [AF(
)] momentarily to turn the blue-back-
SET
ground display OFF.
71
)] for 1 sec.
SET
)] keys also select the TV channel.
)] to exit the channel frequency set
)] to cancel the setting.
)] to exit the channel frequency
[AF] [RX] indicator
[M-ch]
[MENU/GRP] [F-2] [F-3]
[TS]
[Y]
[Z]
[F-4] [DIAL]
ADJ
Push
Rotate
SET
Push