Side Tone Level (Cw Mode); Side Tone Level Limit (Cw Mode); Twin Peak Filter (Rtty Mode); Rtty Mark Frequency (Rtty Mode) - Icom IC-7000 Instruction Manual

13
SET MODE
■ Quick set mode
Side Tone Level
This item adjusts the CW side tone level from 0% to
100% in 1% steps.
See p. 43 for details.
Side Tone Level Limit
This item allows you to set a maximum volume level
for CW side tones. CW side tones are linked to the
[AF] control until a specified volume level is reached
— further rotation of the [AF] control will not increase
the volume of the CW side tones.
Twin Peak Filter
This item turns the twin peak filter ON and OFF.
RTTY Mark Frequency
This item selects the RTTY mark frequency. RTTY
mark frequency is switched between 1275, 1615 and
2125 Hz.
RTTY Shift Width
This item adjusts the RTTY shift width. There are 3
selectable values: 170, 200 and 425 Hz.
RTTY Keying Polarity
This item selects the RTTY keying polarity. Normal or
reverse keying polarity can be selected.
When reverse polarity is selected, Mark and Space
are reversed.
- Normal : Key open/close = Mark/Space
- Reverse : Key open/close = Space/Mark
125
(continued)
(CW mode)
(CW mode)
(RTTY mode)
(RTTY mode)
(RTTY mode)
(RTTY mode)
50% (default)
ON
CW side tone level is limited
with [AF] (default)
ON
Twin peak filter is ON
2125
2125 Hz RTTY mark
frequency (default)
170
170 Hz RTTY shift
frequency (default)
Normal
Normal polarity (default)
5 0 %
OFF
CW side tone level is linked
to [AF]
OFF
Twin peak filter is OFF. (de-
fault)
1275
1275 Hz RTTY mark
frequency
425
425 Hz RTTY shift
frequency
Reverse
Reverse polarity