D Split Offset Frequency Setting; D Quick Split Setting - Icom IC-7000 Instruction Manual

6
FUNCTIONS FOR TRANSMIT

D Split offset frequency setting

By setting an often-used split frequency offset in ad-
vance, you can operate the quick split function to se-
lect split operation at the push of one key.
q Push [AF( )] momentarily to enter the set mode
SET
menu.
w Push [F-4 OTH] to enter the miscellaneous (oth-
ers) set mode.
e Push [F-1 ≤] or [F-2 ≥] to select "SPLIT Off-
set."
r Rotate [DIAL] to set the desired split offset.
• The split offset can be selected from –9.999 MHz to
+9.999 MHz.
• Push [F-4 DEF] for 1 sec. to return to default value.
t Push [Z(
/
MENU GRP
erating mode.

D Quick split setting

q Enter the miscellaneous (others) set mode as
above.
w Push [F-1 ≤] or [F-2 ≥] to select "Quick
SPLIT," then rotate [DIAL] to select the desired
setting.
• Push [F-4 DEF] for 1 sec. to return to default setting.
e Push [Z(
/
MENU GRP
erating mode.
93
)] twice to return the normal op-
)] twice to return the normal op-
[AF]
[MENU/GRP] [F-1] [F-2] [F-4] [DIAL]