Shutting Down And Restarting The System; Shutting Down The System - IBM INFO PRINT 3000 Operator's Manual

Shutting Down and Restarting the System

Use this procedure when:
v A recovery action procedure instructs you to either Shutdown or Restart the
v You are changing the Configure Printer Printer Mode setting from dual simplex
v You want to do a general shutdown and power off the system.
You must use the Shutdown procedure to do the following:
v Close all active procedures
v Disable all enabled host system attachments
v Safely prepare the system so that the AFCCU may be powered-off.
Note: You should always do this procedure before you switch off power to the

Shutting Down the System

Note: With a duplex configuration in duplex mode or with a simplex printer, this
system
to duplex
AFCCU, regardless of whether a recovery action procedure instructed you to
switch power off to the system or you are doing it on your own.
procedure shuts down the complete system (both printers in a duplex
configuration). In dual simplex mode, this procedure shuts down only the
target printer. The other printer remains active and usable. If you are
shutting down the last active dual simplex printer, the complete system is
shutdown.
Note that once you have shutdown a dual simplex printer using this
procedure, the only way to get it back to active use is to shutdown the other
dual simplex printer also.
Chapter 6. Operator Responsibilities
61