Checking The Absorbent Pad In The Oil Pan - IBM INFO PRINT 3000 Operator's Manual

Checking the Absorbent Pad in the Oil Pan

Not every printer has an oil pan and absorbent pad. Your CE may install these if
they are necessary for optimum printer operation.
212
InfoPrint 3000 Operator's Guide
Attention!
You may leave printer power on while you perform this task, but the printer
should not be printing.
CAUTION:
<70> The oiler belt, oiler wick roll, and their environments are
high-temperature
these areas.
1. Open the stacker end cover.
Note: When the oiler belt-gate is opened, the fuser begins to cool down
immediately, and the message changes to OILER GATE OPEN.
2. Turn the wing nut counterclockwise to release the oiler-belt gate.
3. Place several layers of absorbent material, such as paper towels on the floor
beneath the oiler-belt gate.
areas. Be very careful when working in