Table of Contents
Advertisement
Adjusting the Display Touch Screen Monitor
You may decide that some physical aspect of the information image that is
displayed on the face of the monitor needs adjusting. You can adjust the image
with the user controls at the bottom of the monitor and the On-Screen-Display
(OSD) icons.
User Controls
Figure 17. Operator Console User Controls
The controls at the bottom of the monitor are for the following tasks:
v Switching the monitor on and off
v Adjusting contrast and brightness
v Activating and adjusting the On-Screen-Display (OSD) control icons.
Table 9 describes the controls and how to use them.
Table 9. User Controls on the Monitor
Using This Control:
Does This:
Power Switch
Switches the monitor on and off.
OSD/Select
Activates the On-Screen-Display and selects a control icon.
Highlight/Adjust
Pops out when pushed. Rotates to highlight OSD icons and adjusts setting
after an icon has been selected.
Contrast
Adjusts contrast between foreground and background.
Brightness
Adjusts background brightness.
Chapter 6. Operator Responsibilities
65
Advertisement
Table of Contents
