Table of Contents
Advertisement
Table 30. SRC Messages (continued)
Code
Message Text
D21B
Intelligent postprocessor failed to clear buffer
D21C
PAGE COMPLETE not sent by intelligent interface
D21E
Side 2 Verify has stopped checking pages
| |
D702
Out of data while printing
D703
Printer unable to do requested command
D705
Printhead overrun while printing
D706
BEAM DETECT was not received.
D707
Loss of printer DVS (vertical sync) pulse
D70B
Printhead underrun
D70C
Print buffers out of sequence
D70D
DVS (vertical sync) pulse frequency error
D70E
Mechanism Interface Card (MIC) parity error
D70F
MIC Print Quality Enhancement (PQE) error
D714
MIC timer 2 error
D715
Parity error between MIC and PQE card
D716
PQE card failed to initialize.
D717
Early ACK from intelligent postprocessor
D718
MIC failed to send frame to intelligent interface
D719
Response timeout on intelligent interface
D71A
Noise on pre/postprocessor port 1
D71B
Noise on pre/postprocessor port 2
D71C
Noise on pre/postprocessor port 3
D71D
6 PPI sync pulse missing
D71E
Scan line error while printing
D71F
Side1/Side 2 mismatch
D720
Verification mark position incorrect
D721
Hardware error: verification mark sensor
D723
MIC memory failure
D724
Side 2 verify has been disabled
Type (Printer Error unless
noted otherwise)
Chapter 10. Responding to Messages
289
Advertisement
Table of Contents
