Developer Area - IBM INFO PRINT 3000 Operator's Manual

Developer Area

You add toner and developer mix to the printer in the developer area. Table 3 on
page 21 describes the controls.
You add toner by placing a new toner cartridge (1) in the developer area next to
the Printer Control Panel.
You add developer mix through the developer mix inlet (2). The developer drain
lever (3), which is marked with a B label, opens and closes the developer drain.
The developer run pushbutton (4), which is marked with an A label, causes new
developer mix to move from the developer mix inlet into the developer.
20
InfoPrint 3000 Operator's Guide
FOR
MS
WID TH
18
17
16 15
14
13 12
11
10 9
8
A
4
1
2
B
3