Nonprocess Runout (Npro) - IBM INFO PRINT 3000 Operator's Manual

Nonprocess Runout (NPRO)

The Nonprocess Runout (NPRO) function lets you move forms from the transfer
station to the stacker. To add an extended length to the standard NPRO length (for
example, if you use a postprocessing device), you can do the following:
v Increase the "NPRO Length" configuration item under the Configure Printer
v Increase an enabled preprocessing or postprocessing device "Pre/postprocessor
See "Advancing Forms Using the NPRO and NPRO Page Functions" on page 75
for detailed information and instructions about NPRO and NPRO Page.
120
InfoPrint 3000 Operator's Guide
procedure. See "Configuring the Printer" on page 219 and "NPRO Length" on
page 223 for more information.
Extended NPRO" characteristics item under the Configure Pre/Post procedure.
See "Configuring Preprocessing/Postprocessing Devices/Interfaces" on page 241
and "Extended NPRO" on page 243 for more information.