IBM INFO PRINT 3000 Operator's Manual page 291

Table 25. Configuration Worksheet – Simplex Model (continued)
Item
Screen Saver Timeout
Alarm Suppression
Fuser Inactivity Timer
Eject to Front Facing
Form definition order
Stacker Enabled
Cut sheet emulation
BTS Installed
BTS Enabled
Offsetter Installed
Offsetter Enabled
Offset on Mark Forms
3130 Bar Code Compatibility
Printer Preheat Temperature
Scan Factory Adjust
Process Factory Adjust
Beam 1 Offset
Beam 2 Offset
Beam 3 Offset
Beam 4 Offset
Beam 5 Offset
Machine Sequence
Manufacturing Plant
Date and Time
HOST ATTACHMENTS CONFIGURATION:
Parallel Channel:
Parallel Link A Installed
Parallel Link B Installed
Device Address
Second Channel
Data Transfer Protocol
Data Streaming Rate
Card 1 Slot Position
Card 2 Slot Position
ESCON Channel:
Available Values
0 to 60 minutes
Yes / No
0 to 9 hours
Yes / No
Yes / No
Yes / No
v None
v Normal Left-to-Right
v Normal Right-to-Left
v Inverted Left-to-Right
v Inverted Right-to-Left
Yes / No
Yes / No
Yes / No
Yes / No
Yes / No
Yes / No
45 to 100°C
(CE Change Only)
(CE Change Only)
(CE Change Only) 0.0 to 15.9
(CE Change Only) 0.0 to 15.9
(CE Change Only) 0.0 to 15.9
(CE Change Only) 0.0 to 15.9
(CE Change Only) 0.0 to 15.9
(CE Change Only)
(CE Change Only)
(CE Change Only)
Yes / No
Yes / No
00 to FF (hexadecimal)
Static / Dynamic
Interlocked / Data Streaming
1.9 / 2.7 / 3.4 / 4.5MB /sec
2 / 4 / Not Installed
2 / 4 / Not Installed
Selected Value
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Automatically set at power on,
cannot be changed.
Automatically set at power on,
cannot be changed.
Chapter 8. Configuring the System
259