Table of Contents
Advertisement
3. To release the oiler-belt gate, turn the wing nut counterclockwise.
FOR
MS
WID
TH
18
17
16
15
14
13
12
11
10
9
8
4. Open the oiler-belt gate.
5. Allow the oiler belt to cool for at least 10 minutes.
6. Lower the hot roll shield.
7. Spread papers on the floor or place a wastebasket under the oiler belt.
8. Use a piece of lightweight cardboard to scrape paper dust and paper chads
from the oiler belt.
9. Raise the hot roll shield.
10. Close the oiler-belt gate.
11. Turn the wing nut clockwise to latch the gate. Ensure that the gate is firmly
latched.
12. Close the stacker end cover.
13. The fuser begins a warm-up cycle. To make the printer ready, SELECT the
Ready pushbutton on the Display Touch Screen window.
Printing resumes when the fuser completes its warm-up cycle.
F O
R M
S
W
ID
T H
1 8
1 7
1 6
1 5
1 4
1 3
1 2
1 1
1 0
9
8
Chapter 6. Operator Responsibilities
87
Advertisement
Table of Contents
