Operations - IBM INFO PRINT 3000 Operator's Manual

Table 2. Operator Responsibilities (continued)
What to Do:
Clear forms jams and errors
|
|
Run traces
Change printer configuration
Clean the oiler belt
Check the absorbent pad in the
oil pan (if they are installed)
Order supplies
Report printer usage
Switch print resolution
10
InfoPrint 3000 Operator's Guide
When to Do It:
As indicated by messages on
the Display Touch Screen
As requested by the system
programmer or service
representative
As requested by the system
programmer or service
representative
Once each week
Once each week
As necessary
End of every month
As requested by system
operator, depending on the
type of job being submitted
Note: Not all InfoPrint 3000
models have this capability.
Where to Find More Information:
"Recovering from a Forms Jam (Simplex
Operations)" on page 121
"Recovering from a Forms Jam (Duplex
Operations)" on page 127.
"Chapter 10. Responding to Messages" on
page 271
"Chapter 9. Print Quality and Problem Solving"
on page 265
"Running Traces" on page 148
"Changing the Language of Messages" on
page 218
"Configuring the Printer" on page 219
"Configuring the Host Attachments" on page 229
"Configuring Preprocessing/Postprocessing
Devices/Interfaces" on page 241
"Cleaning the Oiler Belt" on page 86
"Checking the Absorbent Pad in the Oil Pan" on
page 212
"Ordering Supplies" on page 177
"Reporting Printer Usage" on page 146
"Switching Print Resolution" on page 174