Table of Contents
Advertisement
Table 16. Printer Configuration Items
Configuration Item
Printer Mode (D)
Auto Start
PQE boldness for
|
|
printer 1
|
|
PQE boldness for
printer 2 (D)
Printer 1 Counter
Printer 2 Counter (D) (CE Change Only) The Print Usage Count from the
Printhead resolution
IPDS Resolution
|
|
Font Enhancement
Jam Recovery Type
Description
This entry allows setting whether the duplex system is to
be operated in duplex or simplex (dual-simplex) mode.
(This item applies to Models ED1/ED2.)
If you change the Printer Mode, the Restart procedure
automatically executes a Shutdown procedure.
If Yes, all current attachment interface status
(enable/disable) is saved during a Shutdown procedure,
and automatically restored at the next power on of the
system. Simplex and dual simplex printers are also
automatically made Ready at the completion of the
power on sequence. The Thread/Align forms procedure
must be performed on duplex printers before the system
can be made Ready.
This item must not be changed.
Note: If this value is changed accidentally, set the value
to 85 and inform the CE during the next visit.
See entry for printer 1.
(CE Change Only) The Print Usage Count from the
mechanical counter at the rear of the printer may be
transferred to this counter, which will then become a new
base count in the running "Printer 1 Counter" displayed
in the Printer Status Display Touch Screen window.
mechanical counter at the rear of the printer may be
transferred to this counter, which will then become a new
base count in the running "Printer 2 Counter" displayed
in the Printer Status Display Touch Screen window.
This parameter changes the resolution that the printhead
in this printer uses. Not all values are supported on all
printers.
This parameter can only be set when a printhead
resolution of 600 DPI is selected.
This parameter is used to activate or deactivate the edge
smoothing algorithm for raster fonts. Set to No if edge
smoothing is not desired.
This entry controls under what conditions the host
system will automatically retransmit pages after a forms
jam has been cleared.
v Normal Jam Repositioning - All lost pages are
automatically retransmitted and reprinted.
v Suppress All Jam Repositioning - No lost pages will be
retransmitted. Any missing or damaged pages must be
manually recovered.
Value Options
Duplex or Simplex
Yes or No
100%
See entry for printer 1.
0 to 2 000 000 000
0 to 2 000 000 000
Valid values are 480 or 600 DPI.
The value you select depends on
what features are installed on the
printer.
Automatic, 240 DPI, 300 DPI, or
600 DPI
Yes or No
v Use Normal Jam Repositioning
v Suppress All Jam Repositioning
Chapter 8. Configuring the System
221
Advertisement
Table of Contents
