IBM INFO PRINT 3000 Operator's Manual page 276

Table 23. Pre/Postprocessor Device Configuration Items (continued)
Selectable Field/Item Description
Postprocessor Tag
Type
Distance to
|
Postprocessor
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Postprocessor Error
Page Stop
Postprocessor Verify
Alignment Page Stop
Pre/Postprocessor
Baud Rate in Kbps
244
InfoPrint 3000 Operator's Guide
Listed only for "Coupled" Pre/Postprocessor Types.
Specify a Coupled tag type for all Postprocessing devices
not manufactured by Roll System, Inc.
Specify an RSI Compatible tag type for all
Postprocessing devices manufactured by Roll System,
Inc..
Listed only for "Advanced Postprocessor"
Pre/Postprocessor Types.
If two AF postprocessors are installed, the distance of the
second postprocessor must exceed that of the first.
v If the first postprocessor is a Troy MICR 3900, add an
extra 102 inches to the actual measured distance from
the printer to the second postprocessor.
v If the first postprocessor is a Troy MICR 3900 High
Speed, add an extra 148 inches to the actual measured
distance from the printer to the second postprocessor.
v If the first postprocessor is a Troy MICR 3835, add an
extra 99 inches to the actual measured distance from
the printer to the second postprocessor.
For more information, see Using the IBM 3835 Page
Printers and the IBM 3900 Advanced Function Printers with
the Troy MICR Printers, GA32-0261.
Listed only for "Advanced Postprocessor - MICR"
Pre/Postprocessor Type.
Listed only for "Advanced Postprocessor - MICR"
Pre/Postprocessor Type.
Listed only for "Advanced Postprocessor"
Pre/Postprocessor Types.
Value Options
v Coupled
v RSI Compatible
This item is ignored if you are
configuring a preprocessing
device interface.
v 24 to 800 inches. Default is 99.
v 24 to 1200 inches. Default is 99.
0 to 50 pages
0 to 5000 pages
19.2 or 62.5