Snmp System Configuration - Planet WGSD-10020 User Manual
8-port gigabit + 2 100/1000x sfp managed switch
Hide thumbs
Also See for WGSD-10020:
- User manual (553 pages) ,
- Command manual (433 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
SNMPv3 Users
SNMPv3 Groups
SNMPv3 Views
SNMPv3 Accesses
4.3.2 SNMP System Configuration
Configure SNMP on this page. The SNMP System Configuration screen in
The page includes the following fields:
Object
•
Mode
•
Version
•
Read Community
•
Write Community
Configure SNMPv3 users table on this page.
Configure SNMPv3 groups table on this page.
Configure SNMPv3 views table on this page.
Configure SNMPv3 accesses table on this page.
Figure 4-3-1 SNMP System Configuration page screenshot
Description
Indicates the SNMP mode operation. Possible modes are:
Enabled: Enable SNMP mode operation.
Disabled: Disable SNMP mode operation.
Indicates the SNMP supported version. Possible versions are:
SNMP v1: Set SNMP supported version 1.
SNMP v2c: Set SNMP supported version 2c.
SNMP v3: Set SNMP supported version 3.
Indicates the community read access string to permit access to SNMP agent.
The allowed string length is 0 to 255, and the allowed content is the ASCII
characters from 33 to 126. The field only suits to SNMPv1 and SNMPv2c.
SNMPv3 is using USM for authentication and privacy and the community string
will associated with SNMPv3 communities table.
Indicates the community write access string to permit access to SNMP agent.
The allowed string length is 0 to 255, and the allowed content is the ASCII
characters from 33 to 126. The field only suits to SNMPv1 and SNMPv2c.
SNMPv3 is using USM for authentication and privacy and the community string
will associated with SNMPv3 communities table.
User's Manual of WGSD-10020 Series
Figure 4-3-1
appears.
79
Advertisement
Table of Contents
