Snmp System Configuration - Planet WGSW-20160HP User Manual


SNMPv3 Communities

SNMPv3 Users

SNMPv3 Groups

SNMPv3 Views

SNMPv3 Access

4.3.2 SNMP System Configuration

Configure SNMP on this Page. The SNMP System Configuration screen in
The Page includes the following fields:
Object
•
Mode
•
Version
•
Read Community
•
Write Community
User's Manual of WGSW-20160HP/WGSW-24040HP series
Configure SNMPv3 communities table on this Page.
Configure SNMPv3 users table on this Page.
Configure SNMPv3 groups table on this Page.
Configure SNMPv3 views table on this Page.
Configure SNMPv3 accesses table on this Page.
Figure 4-3-1: SNMP System Configuration Page Screenshot
Description
Indicates the SNMP mode operation. Possible modes are:

Enabled: Enable SNMP mode operation.

Disabled: Disable SNMP mode operation.
Indicates the SNMP supported version. Possible versions are:

SNMP v1: Set SNMP supported version 1.

SNMP v2c: Set SNMP supported version 2c.

SNMP v3: Set SNMP supported version 3.
Indicates the community read access string to permit access to SNMP agent.
The allowed string length is 0 to 255, and the allowed content is the ASCII
characters from 33 to 126.
The field is applicable only when SNMP version is SNMPv1 or SNMPv2c. If
SNMP version is SNMPv3, the community string will be associated with SNMPv3
communities table. It provides more flexibility to configure security name than a
SNMPv1 or SNMPv2c community string. In addition to community string, a
particular range of source addresses can be used to restrict source subnet.
Indicates the community write access string to permit access to SNMP agent.
The allowed string length is 0 to 255, and the allowed content is the ASCII
Figure 4-3-1 appears.
86