Planet WGSD-10020 User Manual page 535

8-port gigabit + 2 100/1000x sfp managed switch

Hide thumbs Also See for WGSD-10020:

Table of Contents

If that device works, refer to the next step.

If that device does not work, check the AC power

While IP Address be changed or forgotten admin password –

To reset the IP address to the default IP Address "192.168.0.100" or reset the password to default value. Press the hardware

reset button at the front panel about 10 seconds. After the device is rebooted, you can login the management WEB interface

within the same subnet of 192.168.0.xx.

User's Manual of WGSD-10020 Series

Wgsd-10020hp