Port Configuration - Planet WGSD-10020 User Manual

Class Usage
0
Default
1
Optional
2
Optional
3
Optional
4
Optional

4.16.3 Port Configuration

This section allows the user to inspect and configure the current PoE port settings
The page includes the following fields:
Object
• PoE Mode
• Schedule
• AF/AT Mode
Range of maximum power used by the PD
0.44 to 12.95 Watts
0.44 to 3.84 Watts
3.84 to 6.49 Watts
6.49 to 12.95 Watts (or to 15.4Watts)
12.95 to 25.50 Watts (or to 30.8Watts)
Table 4-16-1 Device class
Figure 4-16-3 Power over Ethernet Configuration screenshot
Description
There are three modes for PoE mode.
Enable: enable PoE function..
Disable: disable PoE function.
Schedule: enable PoE function in schedule mode.
Indicates the schedule profile mode. Possible porifles are:
Profile1
Profile2
Profile3
Profile4
Allows user to select 802.3at or 802.3af compatibility mode. The default vaule is
802.3at mode. This function wil affect PoE power reservation on Classification
power limit mode only, as 802.3af mode, system is going to reserve 15.4W
maximum for PD that supported Class3 level. As IEEE 802.3at mode, system is
going to reserve 30.8Watts for PD that support Class4 level. From class1 to
User's Manual of WGSD-10020 Series
Classification unimplement
309
Class Dsecription
Very low power
Low power
Mid power
High power
; screen in Figure 4-16-3 appears.