Planet WGSD-10020 User Manual page 272

8-port gigabit + 2 100/1000x sfp managed switch

Hide thumbs Also See for WGSD-10020:

Table of Contents

The page includes the following fields:

• Mode of IP Source

Guard Configuration

Configuration

• Max Dynamic Clients

: Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

Figure 4-12-10 IP Source Guard Configuration screen page screenshot

Enable the Global IP Source Guard or disable the Global IP Source Guard. All

configured ACEs will be lost when the mode is enabled.

Specify IP Source Guard is enabled on which ports. Only when both Global Mode

and Port Mode on a given port are enabled, IP Source Guard is enabled on this

Specify the maximum number of dynamic clients can be learned on given ports.

This value can be 0, 1, 2 and unlimited. If the port mode is enabled and the value

of max dynamic client is equal 0, it means only allow the IP packets forwarding

that are matched in static entries on the specific port.

User's Manual of WGSD-10020 Series

Wgsd-10020hp