Factory Default - Planet WGSD-10020 User Manual

2. Select on the configuration file then click "
After down, the main screen appears "Transfer Completed".
3.

4.2.21 Factory Default

You can reset the configuration of the stack switch on this page. Only the IP configuration is retained. The new configuration is
available immediately, which means that no restart is necessary. The Factory Default screen in
Figure 4-2-27 Windows file selection menu popup
", the bottom of the browser shows the upload status.
Figure 4-2-28 Factory Default page screenshot
75
User's Manual of WGSD-10020 Series
Figure 4-2-28 appears.