4.9.2 Port Policing
This page allows you to configure the Policer settings for all switch ports. The Port Policing screen in
The page includes the following fields:
Object
•
Port
•
Enable
•
Rate
•
Unit
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-9-1 QoS Ingress Port Policers page screenshot
Description
The port number for which the configuration below applies.
Controls whether the policer is enabled on this switch port.
Controls the rate for the policer. The default value is "500". This value is
restricted to 100-1000000 when the "Rate Unit" is "kbps" or "fps", and it is
restricted to 1-15000 when the "Policer Unit" is "Mbps" or "kfps".
Controls the unit of measure for the policer rate as kbps, Mbps, fps or kfps . The
default value is "kbps".
User's Manual of WGSD-10020 Series
176
Figure 4-9-1
appears.