Dynamic Ip Source Guard Table - Planet WGSD-10020 User Manual

more entries" is shown in the displayed table. Use the "|<<" button to start over.
The page includes the following fields:
Object
• Port
• VLAN ID
• MAC Address
• IP Address
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Refreshes the displayed table starting from the "Start from MAC address" and "VLAN" input fields.
: Flushes all dynamic entries.
: Updates the table starting from the first entry in the MAC Table, i.e. the entry with the lowest VLAN ID and MAC
address.
: Updates the table, starting with the entry after the last entry currently displayed.

4.13.4 Dynamic IP Source Guard Table

Entries in the Dynamic IP Source Guard Table are shown on this page. The Dynamic IP Source Guard Table is sorted first by
port, then by VLAN ID, then by IP address, and then by IP mask. The Dynamic IP Source Guard Table screen in
appears.
Navigating the ARP Inspection Table
Each page shows up to 99 entries from the Dynamic IP Source Guard table, default being 20, selected through the "entries per
page" input field. When first visited, the web page will show the first 20 entries from the beginning of the Dynamic IP Source
Guard Table.
Description
The port number for which the status applies. Click the port number to see the
status for this particular port.
The VLAN ID of the entry.
The MAC address of the entry.
The IP address of the entry.
Figure 4-13-4 Dynamic IP Source Guard Table screenshot
User's Manual of WGSD-10020 Series
280
Figure 4-13-4