Igmp Snooping Vlan Configuration - Planet WGSD-10020 User Manual

• Fast Leave
• Throtting
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.8.3 IGMP Snooping VLAN Configuration

Each page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. The IGMP Snooping VLAN Configuration
screen in Figure 4-8-6 appears.
The page includes the following fields:
Object
• VLAN ID
• IGMP Snooping Enable
• IGMP Querier
• RV
• QI
Enable the fast leave on the port.
Enable to limit the number of multicast groups to which a switch port can belong.
Figure 4-8-6 IGMP Snooping VLAN Configuration page screenshot
Description
The VLAN ID of the entry.
Enable the per-VLAN IGMP Snooping. Only up to 64 VLANs can be selected.
Enable the IGMP Querier in the VLAN.
Robustness Variable. The Robustness Variable allows tuning for the expected
packet loss on a network. The allowed range is 1 to 255, default robustness
variable value is 2.
Query Interval. The Query Interval is the interval between General Queries sent
User's Manual of WGSD-10020 Series
159