Auto-Negotiation - Planet WGSD-10020 User Manual

8-port gigabit + 2 100/1000x sfp managed switch

Hide thumbs Also See for WGSD-10020:

Table of Contents

7.5 Auto-Negotiation

The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth

when a connection is established with another network device (usually at Power On or Reset). This is done by detect the modes

and speeds at the second of both device is connected and capable of, both 10Base-T and 100Base-TX devices can connect

with the port in either Half- or Full-Duplex mode.

If attached device is:

10Mbps, no auto-negotiation

10Mbps, with auto-negotiation

100Mbps, no auto-negotiation

100Mbps, with auto-negotiation

100Base-TX port will set to:

10/20Mbps (10Base-T/Full-Duplex)

100/200Mbps (100Base-TX/Full-Duplex)

User's Manual of WGSD-10020 Series

Wgsd-10020hp