Planet WGSD-10020 User Manual page 114

VLAN Port Configuration
The VLAN Port Configuration screen in
The page includes the following fields:
Object
• Port
• PVID
Ingress Filtering
Accept Frame Type
•
• Link Type
Figure 4-6-2 appears.
Figure 4-6-2 VLAN Port Configuration page screenshot
Description
This is the logical port number for this row.
Allow assign PVID for selected port. The range for the PVID is 1-4094.
The PVID will be inserted into all untagged frames entering the ingress port. The
PVID must as same as the VLAN ID that the port belong to VLAN group, or the
untagged traffic will be dropped.
Enable ingress filtering for a port by checking the box. This parameter affects
VLAN ingress processing. If ingress filtering is enabled and the ingress port is not
a member of the classified VLAN of the frame, the frame is discarded. By default,
ingress filtering is disabled (no checkmark).
Determines whether the port accepts all frames or only tagged frames. This
parameter affects VLAN ingress processing. If the port only accepts tagged
frames, untagged frames received on the port are discarded. By default, the field
is set to All.
Allow 802.1Q Untagged or Tagged VLAN for selected port.
When adding a VLAN to selected port, it tells the switch whether to keep or
remove the tag from a frame on egress.
- Untag: outgoing frames without VLAN-Tagged.
User's Manual of WGSD-10020 Series
114